
Description
The Aquasure Fortitude V Series Dual Purpose Sediment & Carbon Filter System (AS-F110SCP) provides a unique design that combines an outer sediment layer for the efficient removal of suspended particles in the water with an inner carbon core that absorbs chlorine, taste, odors, and chemicals. The high-flow, dual-purpose whole-house water filter excels in cost-to-performance value, making it a great pre-treatment filter solution for a wide range of residential, commercial, and light industrial applications.
• A pre-filter system is your first line of defense, safeguarding downstream equipment and optimizing efficiency.
• Efficient 25 Micron nominal rating for capturing large, suspended particles, such as sand, silt, debris.
• Effectively removes sediment, chemicals, chlorine, VOCs, bad taste, and odor from your water.
• Helps to prolong life of water appliances and plumbing fixtures.
• 3/4" or 1" NPT inlet and outlet for minimal to no reduction in water flow or pressure.
• Enhance your water quality and enjoy cleaner water without unwanted particles and harmful chemicals.
• Replace filters after 50,000 gallons or every 6 months as recommended for optimal performance.
• Hassle-free maintenance with our replacement filter SKU: AF-SCP-4510
• Comes with 1 Year Manufacturer Warranty and lifetime tech support
Specifications
Model No.
AS-F110SCP
Customer Reviews
Community Q & A
QUESTIONS & ANSWERS
Ask a Question-
Does this filter PFAs?
Yes, it will reduce PFA's. Reverse Osmosis will remove PFA's.
-
Is there a bypass valve located within this filter sysyem. IE does a internal valve bypass filtration when the filter becomes to restricted. The previous owner ran the system without a filter installed. I installed a new AF-SCF-25HFS after washing out the filter housing less than a month ago. It helped clear the water at the taps, now the water is again dirty after less than a month. Could the filter be restricted to the point that a bypass valve is now flowing water without filtration into the softener?
There is no bypass valve located at the pre-silter unless one was installed there by the previous owner.Â
If the water coming into the home really hard and dirty then the pre-filter will need to replaced alot sooner.Â
If you would like to send us photos of the installation to better determine the issue please conctact support@aquasureusa.com -
How to you get the top gasket on filter to line up properly on the hole in the housing when you install the filter?
It may seal up slighlty off centered, but as along as the cap seals over th housing, this is fine.
-
What is the maximum flow rate
2GPM
-
Well this filter remove arsenic
It will not. None of our filters are rated at treating arsenic.
-
What is the max psi output this filter will support
Max fortitude v series can support is 75 psi
-
Does this filter remove Trihalomethanes . If not which filter system does.
Pre-filters do not remove Trihalomethanes. The only system we carry to remove this is our RO system about 90% removal. RO system is installed under the sink and not a whole house filter. Just for purified drinking water.
-
Is this Fortitude V Series Sediment and Carbon filter intended to be installed upstream of the water softener? I just ordered a 32 grain softener from you with 3/4†NPT fittings because my main water lines are all 3/4â€. Can I still use this filter that has 1†NPT fittings and simply add adaptors to reduce to 3/4â€. If so, how far should the 1†line extend on each side of the filter to make efficient use of it? Thanks and regards, Erroll
The Fortitude V Series Sediment and Carbon filter are typically installed before the softener system meaning your water source should be the first thing the pre-filter passes through followed by the softener system. Additionally, if your pipes in the home are 3/4" then you can, of course, use reducer fittings to make the proper connection to the pre-filter. The 1" line on each side should not extend too far out from the inlet/outlet sides of the filter if the proper reducer fitting is used.
-
Extra Filters? what is the cartridge number or SKU.
The replacement filter SKU and link are below.Â
SKU:Â
https://aquasureusa.com/collections/water-filters/products/aquasure-fortitude-v-series-10-high-capacity-25-micron-sediment-and-carbon-dual-purpose-carbon-filter?variant=31778042609723 -
How effectively does this filter remove radon from water
This filter would not remove radon.
-
What is the door rate
You seem to have asked, "What is the door rate".
We are assuming that you are asking about the "flow rate" though. If so, the flow rate of the Sediment/Carbon Dual Purpose Pre-Filter is up to 20GPM. -
Before I purchase, like to know availabilty of O ring replacement. This offering does not show how one can get replacement O ring?
A new O-ring for this unit is available for purchase. If needed please contact us directly and we can send you a custom invoice via email to place a secure order for the pre-filter's O-ring.
-
How often should this filter be changed?
The 10" filters replaces the cartridge after 6 months depending on water quality.
-
does city water travel though fortitude filter before going into harmony water softener or after ????
The water will flow through the prefilter first and then should go through the water softener.
-
Free Shipping Over $99
Quality water treatment products, delivered to you on the house.
-
Technical Support
Your safety is our highest priority. Our support team is here to help.
-
Safe & Secure Payments
Certified Level 1 PCI DSS compliant payment options.
-
Professional Warranty Service
2-year extended warranty for all Aquasure registered products.