AQUASURE DASH Series Countertop Drinking Water System Installation Guidelines
This is a installation guide on how to install Aquasure Dash Series drinking water system. For complete owners manual and system installation instruction, we suggest downloading our owners manual in PDF format here.
Please follow the below step by step guidelines for system insatllation. Feel free to contact our support team during our normal business our if you have any questions or concerns during the install.
Step 1REMOVING THE AERATOR
Removing the aerator from the faucet on which filter will be installed
Step 2DETERMINE THE TYPE OF THREADS
Determine the type of threads on your faucet:
External threads: No adapters should be needed.
Internal threads: Through trial and error, select the proper adapter and washer to screw into faucet and tighten manually.
Step 3INSTALL THE DIVERTER VALVE
Screw the diverter valve onto the faucet, turning swivel collar to tighten.
Make certain that gasket (already installed in diverter valve) is positioned securely between the diverter valve and the faucet (or adapter). Rotate diverter valve stem to desired position. Swivel collar may need to be retightened. Place assembly conveniently next to sink.
Step 4TESTING THE CONNECTION
Turn on water and rotate lever.
This causes the water to flow through the filter before exiting the faucet. To stop water flow to filter, rotate the lever back to turn water off.
A drinking water cartridge may contain carbon fines (very fine black powder). After installation, flush the cartridge for 5 minutes to remove the fines before using water.
It is recommended that you run the tap at least 20 seconds prior to using water for drinking or cooking purposes.
During initial use, your water may appear cloudy. This cloudiness is caused by air that has been trapped in the cartridge. If you let the water sit for 5 minutes in a glass, you will notice the cloudiness disappear from the bottom up. This phenomenon is not harmful.